|
Electronic Tacho Generator It generates 0-10V DC analog signal (factory set) proportional to the rpm of the Tacho-generator shaft. 10V output can be given at the maximum specified rpm which can be from 5 rpm to 6000 rpm. Alternatively a current signal of 4-20 mA or 0-20 mA can also be provided instead of voltage output.
| Output |
| O/P Pulses |
Up to 1024 PPR (Optional) |
| Mounting |
Servo/Face Mounting by 3 screws of M-4, 120 degree apart on a PCD of 42mm dia. |
| Dimensions |
Body Dia.=58 mm, Depth=67mm (Excluding Shaft & cable gland) |
| SUPPLY VOLTAGE |
24V DC (±20%) ripple free |
| OUTPUT |
0-10 V DC, 4-20 mA, 0-20 mA (proportional to shaft rpm) |
OUTPUT PULSES Single channel (optional)
|
120 PPR (standard) |
| OUTPUT LINEARITY |
± 0.3% |
| OUTPUT CURRENT |
50 mA max. at full output. |
| OUTPUT LOAD (max.) |
200 Ohm |
| OUTPUT CABLE LENGTH |
1 meter (Standard) |
| MECHANICAL BODY |
Machined Aluminium body in anodised finish. |
| SHAFT |
Stainless steel (SS-304) of 6 mm. dia., 12 mm long. |
| PROTECTION CLASS |
Weather proof as per IP-64 |
|
